Differences

This shows you the differences between two versions of the page.

--- en:docs:fapi:doserror [2018/08/31 13:08] – created prokushev
+++ en:docs:fapi:doserror [2021/09/17 09:43] – prokushev
@@ Line 1: / Line 1: @@
+{{page>en:templates:fapiint}}
+====== DosError ======
 This call allows an OS/2 process to receive hard error notification without generating a hard error signal.
-==Syntax==
+===== Syntax =====
- DosError (Flag)
+<code c>
+DosError (Flag)
+</code>
+===== Parameters =====
+  * Flags ([[USHORT]]) - input : Bit field, defined in the following example (the unused high-order bits are reserved and must be set to zero).
+^ Bit ^ Description ^
+| 15-2 | Reserved, set to zero |
+| 1 | 0 = Enable exception popups.        1 = Disable exception popups |
+| 0 | 0 = Disable hard error popups (fail requests).       1 = Enable hard error popups |
+===== Return Code =====
-==Parameters==
+rc ([[USHORT]]) - return
-;Flags (USHORT) - input : Bit field, defined in the following example (the unused high-order bits are reserved and must be set to zero).
- Bit   Description
--2  Reserved, set to zero.
-     0 = Enable exception popups.
-= Disable exception popups.
-     0 = Disable hard error popups (fail requests).
-= Enable hard error popups.
-==Return Code==
- rc (USHORT) - return
 Return code descriptions are:
-*0  NO_ERROR
-*87 ERROR_INVALID_PARAMETER
-==Remarks==
+ *0  NO_ERROR
+ *87 ERROR_INVALID_PARAMETER
+===== Remarks =====
 DosError allows an OS/2 process to disable user notification if a program (or untrapped numeric processor) exception occurs. If end user notification is disabled, and if one of these exceptions occurs, the process is terminated.
 Hard errors generated under a process that has issued a DosError call are failed, and the appropriate error code is returned. The default situation is both hard error pop-ups and exception pop-ups are enabled, if DosError is not issued.
-===Family API Considerations===
+==== Family API Considerations ====
 Some options operate differently in the DOS mode than in the OS/2 mode. Therefore, the following restriction applies to DosError when coding for the DOS mode:
@@ Line 33: / Line 40: @@
 Note: Since INT 24 is not issued in DOS mode, this call has no effect when running in DOS mode.
-==Bindings==
+===== Bindings =====
-===C Binding===
-<PRE>
+==== C Binding ====
+<code c>
 #define INCL_DOSMISC
@@ Line 42: / Line 51: @@
 USHORT  rc;            /* return code */
-</PRE>
+</code>
-===MASM Binding===
+==== MASM Binding ====
-<PRE>
+<code asm>
 EXTRN  DosError:FAR
 INCL_DOSMISC   EQU 1
@@ Line 53: / Line 63: @@
 Returns WORD
-</PRE>
+</code>
+==== Example Code ====
-==Example Code==
 This example disables hard error popups and exception popups, then re-enables them.
-<PRE>
+<code c>
 #define INCL_DOSQUEUES
@@ Line 71: / Line 82: @@
  rc = DosError(DISABLE_ERRORPOPUPS); /* Action flag */
  rc = DosError(ENABLE_ERRORPOPUPS);  /* Action flag */
-</PRE>
+</code>
-====== Note ======
+===== Note =====
 Text based on [[http://www.edm2.com/index.php/DosError_(FAPI)]]